View B39941B7675P810_1880763.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? epcos ag 2010. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw duplexer wcdma band viii series/type: ordering code: b7675 B39941B7675P810 date: version: february 12, 2010 2.0
2 february 12, 2010 b7675 897.5 / 942.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone wcdma band viii systems n low insertion attenuation n low amplitude ripple n usable passband 35 mhz features n package size 2.5 x 2.0 x 0.68 mm 3 n rohs compatible n approximate weight 0.013 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n msl 3 bottom view side view top view 2.0 2.5 0.4 3 21 67 5 4 8 9 0.55 0.4 0.4 0.3 0.68 0.9 1 2 3 8 67 5 4 pin configuration n 1 rx output, single ended n 3 tx input, single ended n 6 antenna n 2,4,5,7,8,9 ground 2, 4, 5, 7, 8, 9 13 6
3 february 12, 2010 b7675 897.5 / 942.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C15 ?c to +80 ?c ant terminating impedance: z ant =50 w || 9.2 nh rx terminating impedance: z rx =50 w tx terminating impedance: z tx =50 w + 2.0 nh (series) *) *) integration of tx coil into a typical pa matching network should be possible without additional elements. characteristics tx-ant min. typ. @ 25?c max. center frequency f c 897.50 mhz maximum insertion attenuation @f carrier 882.4 ... 912.6mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 1.8 2.7 db amplitude ripple (p-p) @f carrier 882.4 ... 912.6mhz d wcdma 1) 0.9 1.8 db error vector magnitude @f carrier 882.4 ... 912.6mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2.1 5.5 % @f carrier 882.4 ... 912.6mhz evm 2) 2.1 4.2 3) 3) t=0 ?c to +55 ?c % vswr tx port 880.0 ... 915.0mhz 1.7 2.1 ant port 880.0 ... 915.0mhz 1.6 2.0 attenuation a 0.3 ... 840.0mhz 25 33 db 840.0 ... 865.0mhz 30 37 db @f carrier 927.4 ... 957.6mhz a wcdma 1) 41 47 db 960.0 ... 1472.0mhz 25 34 db 1472.0 ... 1477.0mhz 25 38 db 1550.0 ... 1600.0mhz 35 40 db 1760.0 ... 1830.0mhz 25 46 db 1830.0 ... 2500.0mhz 25 37 db 2500.0 ... 4000.0mhz 15 27 db 4000.0 ... 5825.0mhz 15 25 db
4 february 12, 2010 b7675 897.5 / 942.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C15 ?c to +80 ?c ant terminating impedance: z ant =50 w || 9.2 nh rx terminating impedance: z rx =50 w tx terminating impedance: z tx =50 w + 2.0 nh (series) *) *) integration of tx coil into a typical pa matching network should be possible without additional elements. characteristics ant-rx min. typ. @ 25?c max. center frequency f c 942.5 mhz maximum insertion attenuation @f carrier 927.4 ... 957.6mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 2.0 2.7 db amplitude ripple (p-p) @f carrier 927.4 ... 957.6mhz d wcdma 1) 0.7 1.7 db error vector magnitude @f carrier 927.4 ... 957.6mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2.2 4.7 % vswr rx port 925.0 ... 960.0mhz 1.7 2.1 ant port 925.0 ... 960.0mhz 1.6 2.0
5 february 12, 2010 b7675 897.5 / 942.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C15 ?c to +80 ?c ant terminating impedance: z ant =50 w || 9.2 nh rx terminating impedance: z rx =50 w tx terminating impedance: z tx =50 w + 2.0 nh (series) *) *) integration of tx coil into a typical pa matching network should be possible without additional elements. characteristics ant-rx min. typ. @ 25?c max. attenuation a 0.3 ... 835.0mhz 30 40 db 835.0 ... 880.0mhz 38 43 db @f carrier 882.4 ... 912.6mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 45 54 db 980.0 ... 1805.0mhz 15 43 db 1805.0 ... 1920.0mhz 30 56 db 1920.0 ... 2400.0mhz 30 49 db 2400.0 ... 2500.0mhz 30 48 db 2500.0 ... 2880.0mhz 25 37 db 2880.0 ... 4000.0mhz 25 40 db 4000.0 ... 6000.0mhz 15 32 db characteristics tx-rx min. typ. @ 25?c max. isolation between tx and rx @f carrier 882.4 ... 912.6mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 52 56 db @f carrier 927.4 ... 957.6mhz a wcdma 1) 45 50 db
6 february 12, 2010 b7675 897.5 / 942.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for umts-passband, f carrier ranges from 882.4 mhz (lowest tx channel) to 912.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings operable temperature range t C30 / +85 ?c storage temperature range t stg C40 / +85 ?c dc voltage v dc 5 v esd voltage v esd 100 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at p in source and load impedance 50 w 880.0 ... 915.0 mhz elsewhere 30 10 dbm dbm continuous wave 55 ?c, 10000 h } s s d21 f () h rrc ff carrier C () 2 f d h rrc f () 2 f1 = d
7 february 12, 2010 b7675 897.5 / 942.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (powertransferfunction) frequency response tx-ant (wideband)
8 february 12, 2010 b7675 897.5 / 942.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response rx-ant (powertransferfunction) frequency response rx-ant (wideband)
9 february 12, 2010 b7675 897.5 / 942.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (powertransferfunction) frequency response tx-rx (wideband)
10 february 12, 2010 b7675 897.5 / 942.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b7675 ordering code B39941B7675P810 marking and package c61157-a3-a54 packaging f61074-v8153-z000 date codes l_1126 s-parameters b7675_nb.s3p b7675_wb.s3p see file header for pin/port assignment. soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2010. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
11 february 12, 2010 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, miniblue, minicell, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39941B7675P810

	To Download B39941B7675P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .